Attach The Vpnserver Entity To The Peer Entity - THOMSON SpeedTouch 608WL Configuration Manual

6.5.4 Attach the vpnserver entity to the peer entity

modify the peer
parameters
Example
E-DOC-CTC-20051017-0169 v0.1
:ipsec peer modify name=peer1 client/server=serv1
The
command attaches the previously defined vpnserver entity to the corresponding
peer.
In this example vpnclient1 is attached to peer1:
[ipsec peer]=>modify
name = peer1
[remoteaddr] = 20.50.10.2
[backupaddr] =
[exchmode] = main
[localid] = (addr)20.60.10.2
[remoteid] = (addr)20.50.10.2
[phyif] = DIALUP_PPPOE
[descr] = AES_MD5
[auth] = secret1
[client/server] = serv1
[options] =
:ipsec peer modify name=peer1 client/server=serv1
[ipsec peer]=>
The result is shown when listing the peer entities:
[ipsec peer]=>list
[peer1]
Remote Address
Backup Remote Address: <unset>
Physical IF
Exchange Mode
Local Identifier
Remote Identifier
Descriptors
Authentication
Client/Server
Options
[ipsec peer]=>
: 20.50.10.2
: DIALUP_PPPOE
: main
: (addr)20.60.10.2
: (addr)20.50.10.2
: AES_MD5
: secret1
: VPN Client Descriptor: serv1
: <unset>
Chapter 6
Advanced Features
187