Chapter 4
Configuration via the Command Line Interface
4.4.3 Create a new peer entity
add command
124
A new Peer is created with the
Example
In the following example, a new peer is created, named peer1
=>IPSec
[ipsec]=>peer
[ipsec peer]=>add
name = peer1
:IPSec peer add name=peer1
[ipsec peer]=>
The result of this operation can be verified with the
[ipsec]=>peer
[ipsec peer]=>list
[peer1]
Remote Address
Backup Remote Address: <unset>
Physical IF
Exchange Mode
Local Identifier
Remote Identifier
Descriptors
Authentication
Client/Server
Options
[ipsec peer]=>
For the newly created peer in this example, all parameters are unset. Setting of the
parameters is described in the next section.
ipsec peer add
command.
list
command.
: <unset>
: <unset>
: <unset>
: <unset>
: <unset>
:
: <unset>
: <unset>
: <unset>
E-DOC-CTC-20051017-0169 v0.1