List All Connection Security Descriptors - THOMSON SpeedTouch 608WL Configuration Manual

4.5.2 List all Connection Security Descriptors

list command
Example
E-DOC-CTC-20051017-0169 v0.1
ipsec connection descriptor list
The
defined Connection Security Descriptors.
The example below shows the pre-defined Connection Security Descriptors of the
SpeedTouch™:
=>ipsec
[ipsec]=>connection
[ipsec connection]=>descriptor
[ipsec connection descriptor]=>list
[AES_SHA1_TUN] : AES(128) HMAC-SHA1 Lifetime 86400s Tunnel Mode
[AES_MD5_TUN] : AES(128) HMAC-MD5 Lifetime 86400s Tunnel Mode
[AES_SHA1_PFS_TUN] : AES(128) HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode
[AES_MD5_PFS_TUN] : AES(128) HMAC-MD5 PFS Lifetime 86400s Tunnel Mode
[3DES_SHA1_TUN] : 3DES HMAC-SHA1 Lifetime 86400s Tunnel Mode
[3DES_MD5_TUN] : 3DES HMAC-MD5 Lifetime 86400s Tunnel Mode
[3DES_SHA1_PFS_TUN] : 3DES HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode
[3DES_MD5_PFS_TUN] : 3DES HMAC-MD5 PFS Lifetime 86400s Tunnel Mode
[DES_SHA1_TUN] : DES HMAC-SHA1 Lifetime 86400s Tunnel Mode
[DES_MD5_TUN] : DES HMAC-MD5 Lifetime 86400s Tunnel Mode
[AES_SHA1_Adv_TUN] : AES(256) HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode
[3DES_SHA1_Adv_TUN] : 3DES HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode
[NullEnc_SHA1_TUN] : NULL HMAC-SHA1 Lifetime 86400s Tunnel Mode
[ipsec connection descriptor]=>..
[ipsec connection]=>..
[ipsec]=>
Configuration via the Command Line Interface
command shows the list of all
Chapter 4
131