Chapter 4
Configuration via the Command Line Interface
4.7.3 Create a New Connection
add command
146
A new Connection is created with the
Example
In the following example, a new connection is created, named connect1
[ipsec]=>connection
[ipsec connection]=>add
name = connect1
:IPSec connection add name=connect1
[ipsec connection]=>
The result of this operation can be verified with the
[ipsec connection]=>list
[connect1]
Peer
Local network
Remote network : <unset>
Always on
Descriptors
Options
State
[ipsec connection]=>
For the newly created connection in this example, all parameters are unset. Setting
of the parameters is described in the next section.
ipsec connection add
list
: <unset>
: <unset>
: disabled
:
: <unset>
: disabled
command.
command.
E-DOC-CTC-20051017-0169 v0.1