Create A New Network Descriptor - THOMSON SpeedTouch 608WL Configuration Manual

Chapter 4
Configuration via the Command Line Interface

4.6.2 Create a New Network Descriptor

add command
138
A new Network Descriptor is created with the
add
command.
Example
In the following example, a new Network descriptor is created, named net1:
[ipsec]=>
[ipsec]=>connection
[ipsec connection]=>network
[ipsec connection network]=>add
name = net1
:IPSec connection network add name=net1
[ipsec connection network]=>
The result of this operation can be verified with the
[ipsec connection network]=>list
[net1] : <unset>
[ipsec connection network]=>
For the newly created Network Descriptor in this example, all parameters are unset.
Setting of the parameters is described in the next section.
ipsec connection network
list
command.
E-DOC-CTC-20051017-0169 v0.1