Create A New Vpn Server - THOMSON SpeedTouch 608WL Configuration Manual

6.5.2 Create a new VPN server

add command
Example
E-DOC-CTC-20051017-0169 v0.1
A new VPN server is created with the
In the following example, a new vpnclient entity is created, named client1
[ipsec]=>
[ipsec]=>peer
[ipsec peer]=>vpnserver
[ipsec peer vpnserver]=>add
name = serv1
:ipsec peer vpnserver add name=serv1
[ipsec peer vpnserver]=>
The result of this operation can be verified with the
[ipsec peer vpnserver]=>list
[serv1]
Push IP : disabled
Address Range : <unset>
Netmask : <unset>
Primary DNS : <unset>
Secondary DNS : <unset>
Primary WINS : <unset>
Secondary WINS: <unset>
Domain : <unset>
XAuth Pool : <unset>
[ipsec peer vpnserver]=>
For the newly created vpnserver entity in this example, all parameters are unset.
Setting of the parameters is described in the next section.
ipsec peer vpnserver add
list
command.
Chapter 6
Advanced Features
command.
185