Table of Contents
Advertisement
Chapter 4
Configuration via the Command Line Interface
4.2.4 Set or Modify the Authentication Attribute
modify command
108
Parameters
ipsec peer auth modify
The
attribute parameters.
Example
In this example, the parameters of the authentication attribute are set to use the
pre-shared key authentication method. The secret password entered by the user is
not shown in readable format on the screen. An encrypted version is shown
instead.
[ipsec peer auth]=>modify
name = secret1
[type] =
preshared
[type] = preshared
[secret] = *******
Please retype secret for verification.
[secret] = *******
:IPSec peer auth modify name=secret1 type=preshared secret=_DEV_CE84DC8
0F07F679B
[ipsec peer auth]=>
Pressing the TAB key when a user entry is required displays the valid
entries.
command allows to modify the authentication
cert
E-DOC-CTC-20051017-0169 v0.1
Advertisement
Table of Contents
