Chapter 4
Configuration via the Command Line Interface
4.6.1 Network Descriptor Parameters
Parameters table
Network name [name]
Type of network and IP
address [type] and [ip]
136
The following table summarizes the parameters comprised in the Network
Descriptor:
Parameter
Keyword
Network name
name
Type
type
IP address
ip
Protocol
proto
Port
port
This name is used internally to identify the Network Descriptor.
The type and ip parameters locate the network in the IP address space.
For ip, enter a value corresponding to the network type.
type
Valid network types
are:
a single IP address
a single IP subnet
a contiguous IP address
range
Description
Mandatory. Symbolic name to identify the
network.
Mandatory. A network can either be:
a single IP address
an IP subnet
an IP address range
Mandatory. The IP address of the network
Optional. The communication protocol allowed on
the secure network
Optional. For UDP and TCP, the port number that is
allowed to use the secure network.
Keyword:
address
subnet
range
ip
Examples:
10.0.0.15
10.0.0.0/24
10.0.0.5-10.0.0.56
10.0.0.[5-56]
E-DOC-CTC-20051017-0169 v0.1