Table of Contents
Advertisement
Chapter 3
Configuration via Local Pages
3.5.12 Client Page
page layout
Connection
Configuring XAuth
100
Client
The Client page is used for dialling-in to a VPN server.
The configuration of a VPN client scenario is described in detail in section
"3.2 VPN Client" on page 51
Client Web page is the recommended way to configure a VPN client and
allows you to dial in to the VPN server.
Select from the list the name of the connection you want to start.
Local ID
The local ID identifies the local SpeedTouch™ during the Phase 1 negotiation with
the remote Security Gateway. This identity must match the settings in the remote
Security Gateway in order to successfully set up the IKE Security Association. The
Local ID types supported in the SpeedTouch™ are listed in the following table.
Local ID type
Use the values of the peer
profile
User fully qualified domain
name
Fully qualified domain name
Key identity
When you use the Extended Authentication protocol on the connection, you fill out
an XAuth Username and Password in the optional fields.
The XAuth Password is not shown in clear text. In order to protect from
typing errors, you have to confirm your entry.
The use of XAuth is further explained in section
Authentication (XAuth)" on page 176
and following. The application-oriented VPN
Keyword
Examples
as_per_peer_profile
userfqdn
john.doe@corporate.net
fqdn
sales.corporate.net
keyid
cisid
"6.3 Extended
and following.
E-DOC-CTC-20051017-0169 v0.1
Advertisement
Table of Contents
