Create A New Xauth User - THOMSON SpeedTouch 608WL Configuration Manual

6.6.7 Create a new XAuth user

adduser command
Example
E-DOC-CTC-20051017-0169 v0.1
A new XAuth user is created with the
adduser
command.
In the following example the pool, named pool1, is populated with a new XAuth
user, named user1:
=>ipsec
[ipsec]=>peer
[ipsec peer]=>vpnserver
[ipsec peer vpnserver]=>xauthpool
[ipsec peer vpnserver xauthpool]=>adduser
poolname = pool1
username = user1
:ipsec peer vpnserver xauthpool adduser poolname=pool1 username=user1
[ipsec peer vpnserver xauthpool]=>
The result of this operation can be verified with the
[ipsec peer vpnserver xauthpool]=>listpool
name = pool1
:ipsec peer vpnserver xauthpool listpool name=pool1
Pool pool1 type chap
Username: user1
[ipsec peer vpnserver xauthpool]=>
For the newly created vpnserver entity in this example, the password is unset.
Setting of the password is described in the next section.
ipsec peer vpnserver xauthpool
listpool
command.
Password: <unset>
Chapter 6
Advanced Features
195