Exiting The Power Saver Mode - Fuji Xerox ApeosPort-V 4020 User Manual

Exiting the Power Saver Mode

The machine exits the Power Saver mode by the following instances:
 Pressing the <Power Saver> button on the control panel
 Receiving jobs such as print and fax
 Selecting [Apply] in CentreWare Internet Services
Note
When the following device is connected to the machine and a user performs the following
operation, the Low Power mode can be deactivated without pressing the <Power Saver>
button.
 Touching the IC Card Reader (optional) with a card
Note
• When the machine is in the Sleep mode, it takes longer time to exit the Power Saver mode than
when the machine is in the Low Power mode.
• The Sleep mode cannot be deactivated by the operation. When the above device is connected to
the machine, you can make the machine exit the Power Saver mode without pressing the <Power
Saver> button by setting longer time to elapse until the machine enters the Sleep mode.
• When the machine enters the Sleep mode with the IC Card Reader (optional) connected, it may take
longer time to exit the Power Saver mode.
Power Saver Mode
2
67