(Specifying A Destination Pc Using The Screen Keyboard); Specifying A Destination (Specifying A Destination Pc Using The Screen Keyboard) - Fuji Xerox ApeosPort-V 4020 User Manual

Specifying a Destination

(Specifying a Destination PC Using the Screen Keyboard)

Enter information in the fields provided for the selected protocol, to specify a forwarding
destination.
Important • When using the My Folder feature in computer environment earlier than Windows 98/Windows
Note
1
Select the item to be set.
Note
2
Enter information using the keyboard
displayed on the screen.
For information on how to enter characters, refer to "Entering
Text" (P.78).
Note
 Server
This option is displayed when you select [FTP] or
[SMB] in [Transfer Protocol]. Enter a server name or IP address. When the save location is in
the DFS namespace on Windows, enter a domain name or server name. Up to 64 characters
are allowed.
The following are examples:
Note
 For [FTP]:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.0.2.1
 For [SMB]:
Server name: myhost
IP address: 192.0.2.1
 Shared Name
This option is displayed when you select [SMB] in [Transfer Protocol]. Enter a shared name.
When the save location is in the DFS namespace on Windows, enter a root name. Up to 64
characters are allowed.
®
NT , a destination user name in the earlier format (domain name\user name) will not be
determined automatically. Before scanning, change the user name with which you can log in
correctly.
• When you select [Login to Remote Accounts] for [Login Type] and select [Enabled] for [Scan to My
Folder] using CentreWare Internet Services, the scanned document can be transferred to a different
destination. You can select [Enabled] for [Scan to My Folder] only when [Login to Remote Accounts]
and [SMB] are selected for [Login Type] and [Transfer Protocol] respectively. For information on
configuration procedure, refer to the help of CentreWare Internet Services.
• You can also select [Address Book] to enter
information.
• Fields displayed on the screen vary
depending on the selected protocol.
• To delete characters, select [Backspace].
• When Scan to My Folder feature is enabled, [Server] is automatically determined on the [Scan to PC]
screen. If you change the setting of [Server], the [Scan to My Folder] feature is disabled. You can use
the [Scan to My Folder] feature again by selecting [Scan to My Folder] for [Transfer Protocol].
Scan to PC
5
273