Charge Print - Fuji Xerox ApeosPort-V 4020 User Manual

11 Job Status

A previewed image is enlarged or reduced.
In the enlarged view, the following operations
are available.



 Print Quantity
Specify the number of print sets.
 2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
 Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
Note
 Print
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the job
will not be printed at the specified time.
Refer to "When [Print] is Selected" (P.368).
When [Print] is Selected
1
Select [Yes].
Note
11
 Yes
Starts printing the job. After printing, the job is deleted.
 No
Cancels printing the job.

Charge Print

This feature authenticates users on the machine to prevent unauthorized users from
operating print jobs. When this feature is enabled, the machine prints only the jobs of
368
(Enlarged view)
Drag or flick the enlarged image to move the
position to be displayed.
Double-tap the previewed image to change
the ratio of the image size.
Drag the slider to change the ratio of the
image size.
• This item is displayed when the booklet layout is set using a printer driver.
• When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.
• The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the
confirmation screen. For more information,
refer to "5 Tools" > "Stored File Settings" >
"Print Job Confirmation Screen" in the
Administrator Guide.