Fuji Xerox ApeosPort-V 4020 User Manual page 371


(Entire view)
An entire preview image is displayed.
In the entire view, the file name, Stored Date,
and Pages are displayed on the right side of the
preview area.
Double-tap the preview area to move to the
enlarged view.

(Enlarged view)
A previewed image is enlarged or reduced.
In the enlarged view, the following operations
are available.
Drag or flick the enlarged image to move the

position to be displayed.
 Double-tap the previewed image to change
the ratio of the image size.
 Drag the slider to change the ratio of the
image size.
 Print Quantity
Specify the number of print sets.
 2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
 Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
Note
 Print
Prints the Charge Print job. After printing, the job is deleted.
Refer to "When [Print] is Selected" (P.371).
When [Print] is Selected
1
Specify how to process the job after printing.
Note
 Print and Delete
Starts printing the job. After printing, the job is deleted.
• This item is displayed when the booklet layout is set using a printer driver.
• When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.
• The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the
confirmation screen. For more information,
refer to "5 Tools" > "Stored File Settings" >
"Print Job Confirmation Screen" in the
Administrator Guide.
Printing and Deleting Stored Jobs
11
371