[Link Job Flow Sheet To Folder] Screen - Fuji Xerox ApeosPort-V 4020 User Manual

1
Select files on the [Folder - File List] screen.
2
Select [Job Flow Settings].
3
Select any option.
 Auto Start
This sets auto start of the job flow for files
stored in the folder. The job flow automatically
starts when a file is stored.
 Start Current Job Flow
Select files in the folder, and then select this
button to start the job flow linked to this folder.
Important • After executing the job flow, confirm the [Job Status] screen or print a Job History Report to check
 Cut Link
Cancels the link between a folder and the linked job flow sheet.
 Create/Change Link
Displays the [Link Job Flow Sheet to Folder] screen.
Refer to "[Link Job Flow Sheet to Folder] Screen" (P.319).
 Select Job Flow Sheet
Select this button while files are selected to display the [Select Job Flow Sheet] screen.
Refer to "[Select Job Flow Sheet] Screen" (P.321).

[Link Job Flow Sheet to Folder] Screen

You can change the link between the folder and its job flow sheet.
Note
1
Select a job flow sheet to link to.
Important • Selecting [Save] without selecting a job flow
Note
the result. For information on the Job History Report, refer to "5 Tools" > "Common Service Settings"
> "Reports" > "Job History Report" in the Administrator Guide.
• Linking, delinking, and auto start settings can be also performed when you create a folder.
sheet does not set a link. If the selected job
flow sheet is already linked, the link is
canceled.
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
Configuring/Starting Job Flow
319
6