Fuji Xerox ApeosPort-V 4020 User Manual page 133

 Off
Build Job is not applied.
 On
Build Job is applied. The feature buttons appear. Specify any option if necessary.
Important • The features selected here cannot be canceled or changed while the machine executes a copy job.
For information on features available in Build Job, refer to "Features that can be set in Build Job" (P.133).
Features that can be set in Build Job
 Copy Output
For more information, refer to "Copy Output (Specifying Finishing Options)" (P.129).
 Booklet Creation
For more information, refer to "Booklet Creation (Creating a Bound Booklet)" (P.114).
 Covers
Important • The machine does not copy on a cover when using the Build Job feature.
For more information, refer to "Covers (Attaching Covers to Copies)" (P.116).
 Annotations
For more information, refer to "Annotations (Adding a Comment/a Date/Page Numbers to Copies)" (P.120).
 Segment Separators
For more information, refer to "[Segment Separators] Screen" (P.134).
 Watermark
For more information, refer to "Watermark (Printing Control Numbers on the Background of Copies)" (P.125).
[Copy] Screen When Build Job is in Progress
The following describes the screen that appears
while the Build Job is being executed.
 Chapter Start
Displays the [Build Job - Chapter Start] screen.
Refer to "[Build Job - Chapter Start] Screen" (P.134).
 Insert Separators
Displays the [Segment Separators] screen.
Refer to "[Segment Separators] Screen" (P.134).
 Change Quantity
Displays the [Change Quantity] screen on which you can change the number of copy sets
using the numeric keypad.
 Change Settings
Displays the [Copy] screen on which you can change the settings for the next document.
After changing the settings, press the <Start> button on the control panel to start scanning
of the document. To return to the previous screen, press the < # > button.
When using a stored program for Build Job
While the machine makes copies using the Build Job feature, you can use a stored program.
Job Assembly
3
133