Switching The Power Off; Switching The Main Power Off - Fuji Xerox ApeosPort-V 4020 User Manual

2 Product Overview
For information on the Power Saver feature, refer to "Power Saver Mode" (P.66).
Important • If the power is switched off, all the services of the machine will stop. When using the machine
1
Press the push-button power switch to switch
the power on.
Note

Switching the Power Off

2
The following describes how to switch the power off.
Important • If the power is switched off, all the services of the machine will stop. When using the machine
Note
1
Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator is not blinking.
Important • Do not switch the power off in the following situations. If the power is switched off, the data being
2
Press the push-button power switch.
Important • Power off processing is performed internally
Note

Switching the Main Power Off

The following describes how to switch the main power off.
Important • Do not switch the main power off when a screen is displayed on the touch screen or while the
1
Make sure that the power is switched off.
64
throughout the day for jobs such as receiving fax, do not switch the power off.
• The "Please wait..." message indicates that
the machine is warming up. The machine is
not available during warming up.
• If the machine does not power on, check the
following:
- The power cord is plugged in.
- The main power is switched on.
throughout the day for jobs such as receiving fax, do not switch the power off.
• You can set the machine to be switched off automatically at the same time every day. For more
information, refer to "5 Tools" > "Common Service Settings" > "Power Saver Settings" >"Scheduled
Power Off" in the Administrator Guide.
processed may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
on the machine for a while after the power is
switched off. Therefore, do not switch the
main power off immediately after switching
the power off.
• When powering the machine on after it has
been switched off, wait 15 seconds after the
touch screen has gone dark.
<Power Saver> button is blinking. Switching off the main power under such circumstances may
damage the hard disk and the memory or cause a machine malfunction.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord with
the main power on may damage the hard disk and the memory or cause a machine malfunction.
Job Machine
ABC DEF Log In / Out Status Status
2 3
Dial
Pause
JKL MNO
Clear All
5 6
Interrupt Stop
Speed
TUV WXYZ Dial
Start
8 9
0
C
＃
Power Data Error
Push-button power switch button
Job Machine
ABC DEF Log In / Out Status Status
2 3
Dial
Pause
JKL MNO
Clear All
5 6
Interrupt Stop
Speed
Dial
TUV WXYZ
Start
8 9
0 C
＃
Power Data Error
Push-button power switch button
Power
Saver
Power
Saver