Fuel Injection Delivery Pipes - Ford 2002 Bantam Workshop Manual

303-04D-27
REMOVAL AND INSTALLATION (CONTINUED)

Fuel Injection Delivery Pipes

E6446 EN
Fuel Charging and Controls — 1.8L Diesel Engine
WARNING: This procedure in-
volves fuel handling. Be prepared for fuel
spillage at all times and always observe
fuel handling precautions.
CAUTION: Diesel fuel injection
equipment is manufactured to very precise
tolerances and fine clearances. It is there-
fore essential that absolute cleanliness be
observed when working with these com-
ponents. Always fit blanking plugs to any
open orifices or pipes.
Removal
1. Disconnect the battery ground cable.
2. Remove the four fuel injector leak-off pipes.
3. Detach the fuel supply pipe from the two
retaining clips.
4. Unscrew the four fuel injector delivery pipe
unions from the fuel injection pump.
303-04D-27
09/2001 2002 Bantam