Ford 2002 Bantam Workshop Manual page 723

303-08B-219
REMOVAL AND INSTALLATION (CONTINUED)
E6363 EN
Engine Emission Control — Diesel Engine
4. Remove the exhaust gas re-circulation
valve (two bolts).
Installation
1. CAUTION: When cleaning is required,
take care not to allow debris to fall
into the inlet manifold, exhaust
manifold or exhaust gas
Recirculation valve.
Clean the gasket surfaces of the exhaust
gas re-circulation valve and inlet manifold.
2. Refit the components in reverse order.
303-08B-219
09/2001 2002 Bantam