Coolant Expansion Tank (24 284 0) - Ford 2002 Bantam Workshop Manual

303-03-193
REMOVAL AND INSTALLATION

Coolant Expansion Tank (24 284 0)

E1001 EN
Engine Cooling
Removal
1. Drain the cooling system. For additional
information,
refer to Cooling System Draining, Filling
and Bleeding. In this section
2. Disconnect the expansion tank hoses.
1. Disconnect the radiator to expansion
tank hose.
2. Disconnect the engine to expansion tank
hose.
3. Disconnect the engine supply hose.
3. Remove the expansion tank.
1. Remove the expansion tank retaining
screw.
2. Remove the expansion tank from the
supporting bracket.
Installation
1. To install, reverse the removal procedure.
2. Refill the cooling system. For additional
information,
refer to Cooling System Draining, Filling
and Bleeding. In this section
303-03-193
09/2001 2002 Bantam