Fuel System Pressure Relief (23 420 0) - Ford 2002 Bantam Workshop Manual

310-00-4
GENERAL PROCEDURES

Fuel System Pressure Relief (23 420 0)

E3611 EN
Fuel System — General Information
Release
1. Remove the fuel pump fuse.
2. Start the engine and allow it to idle until the
3. Crank the engine for approximately five
4. Install the fuel pump fuse.
WARNING: Do not smoke or carry
lighted tobacco or open flame of any
type when working on or near any fuel
related components. Highly flammable
vapours are always present and may ig-
nite. Failure to follow these instructions
may result in personal injury.
WARNING: The fuel system remains
pressurized for a long time after the ig-
nition is switched off. The fuel pressure
must be released before attempting any
repairs. Failure to follow this instruction
may result in personal injury.
engine stalls.
seconds to make sure the fuel injection
supply manifold pressure has been
released.
09/2001 2002 Bantam
310-00-4