Air Inlet Blend Door Actuator (34 606 0) - Ford 2002 Bantam Workshop Manual

412-04-9
REMOVAL AND INSTALLATION

Air Inlet Blend Door Actuator (34 606 0)

E1250 EN
Control Components
Removal
NOTE: "Observe Health and Safety Regulations".
For additional information,
1. Standard preparatory measures
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
2. Disconnect the battery ground cable.
3. Remove the instrument panel.
For additional information,
refer to Section 501-12.
4. Remove the actuator.
1. Disconnect the plug.
2. Remove the three screws.
Installation
1. Install the components in reverse order.
2. Connect the battery ground cable.
3. Standard finishing operations.
• Enter the radio keycode.
• Reprogram the preset radio stations.
• Check operation of the actuator.
412-04-9
refer to Section 100-00.
07/2001 2002 Bantam