Ford 2002 Bantam Workshop Manual page 692

303-03-189
REMOVAL AND INSTALLATION
Water Pump — Vehicles with 1.8L Endura DE Diesel Engine (24 404 0)
E6441 EN
Engine Cooling
Removal
1. Disconnect the battery ground cable. For
additional information,
refer to Section 414-01.
2. Drain the cooling system. For additional
information,
Draining, Filling and Bleeding in this section
3. Remove the timing belt. For additional
information, refer to Section 303-01C. For
Ikon
For additional information,
refer to Section 303-01D.
4. Remove the timing belt tensioner.
• Collect the tensioner spring.
5. Accurately mark the position of the engine
support insulator and remove the insulator.
303-03-189
refer to Cooling System
09/2001 2002 Bantam