Ford 2002 Bantam Workshop Manual page 474

303-01B-102
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (CONTINUED)
E6644 EN
Engine — 1.6L / 1.3L RoCam
7. Install the roller finger cam followers.
8. NOTE: Make sure that the camshaft sprocket
alignment slot in the camshaft slot is
uppermost (12 o'clock) when installing the
camshaft.
NOTE: Apply a drop of hypoid oil (WSQ-
1. Install the camshaft and tighten the
2. Tighten each of the camshaft bearing
3. Tighten the bolts to the specified torque
9. Install the engine mounting bracket.
2C9002-AA) to each cam bearing (upper
and lower) half.
Install the camshaft and the camshaft
bearing caps.
bearing caps in two stages.
cap bolts by 90° degrees in the indicated
sequence.
in the indicated sequence.
07/2001 2002 Bantam
303-01B-102