Ford 2002 Bantam Workshop Manual page 581

303-01D-77
IN-VEHICLE REPAIR (CONTINUED)
E5970 EN
Engine — 1.8L Diesel - Endura DE
4. NOTE: Do not oil the cylinder head bolts.
NOTE: Tightening sequence.
5. Fit the cylinder head (continued).
NOTE: For stage 3, slacken one cylinder head
bolt by itself, and then tighten it to the specified
torque and angle. Only then move on to the next
cylinder head bolt.
Fit the cylinder head and tighten the new
cylinder head bolts in two stages.
• Wait three minutes and then tighten the
cylinder head bolts according to tightening
sequence in stage 3.
303-01D-77
09/2001 2002 Bantam