Ford 2002 Bantam Workshop Manual page 448

303-01B-76
IN-VEHICLE REPAIR (CONTINUED)
E6647 EN
Engine — 1.6L
Installation
1. NOTE: Ensure gasket mating surfaces are
clean.
NOTE: Use a new oil pump and gasket.
NOTE: The oil pump sealing flange must be
within ±20mm of cylinder block bottom
sealing flanges.
Install oil pump bolts.
2. Install a new front oil seal. For additional
information,
3. Install the oil pan. For additional
information,
303-01B-76
refer to Front Oil Seal in this section
refer to Oil Pan in this section.
07/2001 2002 Bantam