Ford 2002 Bantam Workshop Manual page 768

303-03-167
REMOVAL AND INSTALLATION
Coolant Expansion Tank (24 284 0)
E1001 EN
Engine Cooling
Removal
1. Drain the cooling system. For additional
information,
Draining, Filling and Bleeding. In this section
2. Disconnect the expansion tank hoses.
1. Disconnect the radiator to expansion
tank hose.
2. Disconnect the engine to expansion tank
hose.
3. Disconnect the engine supply hose.
3. Remove the expansion tank.
1. Remove the expansion tank retaining
screw.
2. Remove the expansion tank from the
supporting bracket.
Installation
1. To install, reverse the removal procedure.
2. Refill the cooling system. For additional
information,
Draining, Filling and Bleeding. In this section
303-03-167
refer to Cooling System
refer to Cooling System
07/2001 2002 Bantam