Ford 2002 Bantam Workshop Manual page 1022

309-00-5
REMOVAL AND INSTALLATION
Exhaust System
Material
Anti-seize grease
E5946 EN
Exhaust System — General Information
Specification
Loctite "Never Seize"
Removal
1. Disconnect the battery ground cable.
2. Disconnect the heated oxygen sensor
multiplug.
3. Remove the manifold heat shield.
4. Disconnect the exhaust downpipe from the
manifold.
• Discard the retaining nuts and any studs
that may have been extracted with the
nuts.
Note:
For vehicles with diesel engines,
refer to Exhaust Flexible Pipe in this section.
5. Raise the vehicle.
309-00-5
Refer to Section 100-02
07/2001 2002 Bantam