The Charging System Warning Indicator Is Inoperative - Ford 2002 Bantam Workshop Manual

BACK TO CHAPTER INDEX
414-00-6
DIAGNOSIS AND TESTING (CONTINUED)
A4: CHECK FOR VOLTAGE
1.
Generator
(C303a)
PINPOINT TEST B: THE CHARGING SYSTEM WARNING INDICATOR IS INOPERATIVE
B1: CHECK LAMP CIRCUIT
1.
Generator
(C303a)
E1297 EN
Charging System — General Information
CONDITIONS
2.
CONDITIONS
2.
FORD BANTAM
DETAILS/RESULTS/ACTIONS
3 Measure the resistance between the
instrument cluster C44b pin 7, circuit 64 (BU-
BK) and ground.
• Is the resistance greater than 10,000 ohms?
Yes
INSTALL a new printed circuit board.
No
REPAIR circuit 64 (BU-BK). TEST the sys-
tem for normal operation.
3 Measure the voltage between the generator
connector C303a pin 1, circuit 31 (BK) and
ground.
• Is the voltage greater than 10 volts?
Yes
INSTALL a new generator.
No
GO TO A2
DETAILS/RESULTS/ACTIONS
PAGES FROM MANUAL
TO MODEL INDEX
414-00-6
CONTINUED
07/2001 2002 Bantam