High Pressure Cut-Off Switch (34 631 0) - Ford 2002 Bantam Workshop Manual

412-03-26
REMOVAL AND INSTALLATION

High Pressure Cut-Off Switch (34 631 0)

E1263 EN
Air Conditioning
Removal
NOTE: "Safety Regulations". For additional
information,
1. Standard preparatory measures
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
• Place protective covers over the fenders.
CAUTION: Disconnect the battery nega-
tive lead.
2. Remove the right-hand headlamp
assembly. For additional information,
refer to Section 417-01.
3. Remove the air conditioning high-pressure
switch.
• Disconnect the plug.
Installation
NOTE: Tightening torques. For additional in-
formation,
refer to Section 412-03. Specifications
1. Refit the components in reverse order.
2. Install the right-hand headlamp. For
additional information,
3. Check the headlamp adjustment and
correct it as necessary. For additional
information,
refer to Section 100-00.
refer to Section 417- 01.
refer to Section 417-01.
07/2001 2002 Bantam
412-03-26