Ford 2002 Bantam Workshop Manual page 574

303-01D-70
IN-VEHICLE REPAIR
Cylinder Head (21 163 0)
Special Tool(s)
Timing pin, crankshaft TDC
position
21-104
Socket, cylinder head bolts
21-164
Angle gauge, bolt tightening
21-540
E5970 EN
Engine — 1.8L Diesel - Endura DE
Removal
Special Tool(s)
Timing pin, camshaft pulley
23-019
Remover/installer, cooling
hose clamp
24-003
Material
Coolant
Sealer
Valve stem installation
sleeves
1. General Remarks.
• This operation was carried out on an
engine with a mechanical timing belt
tensioner.
• If necessary, use remover 303-03 when
removing coolant hoses and vent hoses.
For additional information,
refer to Section 303-03.
2. Standard preparatory measures
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
WARNING: Risk of scalding when the
engine is at operating temperature.
• Open the coolant recovery tank.
303-01D-70
Specification
L405F
SPM-4G-9112-F/G
09/2001 2002 Bantam