Ventilation Nozzles - Ford 2002 Bantam Workshop Manual

412-01-2
DESCRIPTION AND OPERATION
Air Distribution and Filtering
The heating system has been improved in terms
of power output, user-friendliness and ease of
maintenance.
A splined shaft instead of cables controls the air
distribution, and the interior temperature by a
potentiometer integrated into the operating panel.
The potentiometer also controls the heater
control valve, which regulates the flow of hot
water through the heat exchanger according to
the interior temperature setting.
The heat exchanger and, depending on
equipment level, the air-conditioning evaporator
are easily accessible from the engine
compartment.
The air temperature, volume and distribution
can be controlled by the operating switch.

Ventilation nozzles

E1238 EN
Air Distribution and Filtering
The vehicle may also have recirculated air mode
as an option, and which can be activated by
operating a switch on the control panel.
From the air intake aperture, fresh air passes
through the fan, and heater / air conditioning
system and air ducts to various air distribution
nozzles and then into the passenger
compartment.
While the vehicle is traveling a draught free
current of air is emitted by specially shaped
demisting nozzles and passes along close to the
side windows and then through to the outside.
This active ventilation keeps the side windows
clear and provides constant ventilation.
Item Description
1
2
3
OPEN
• The fan is switched off completely when the
air distribution switch is turned to OFF.
CLOSED
Right / left adjustment
Up / down adjustment
Open / Closed adjustment
07/2001 2002 Bantam
412-01-2