Ford 2002 Bantam Workshop Manual page 964

308-03-74
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (CONTINUED)
E1163 EN
Manual Transaxle
3. NOTE: Ease of movement and correct
resetting to "neutral" position.
Check the relay levers and the detent
mechanism.
1. Relay lever (shift)
2. Relay lever (select)
3. Return spring (shift mechanism neutral)
4. Remove the shift rod and the reverse gear
shift lever.
1. Detach the selector block from the shift
rod (remove the bolt).
• Pull out the shift rod and take out the
selector block.
2. Detach the snap-ring and remove the
reverse gear shift lever with spring.
Assembly
1. Install the shift rod and the reverse gear
shift lever.
1. Insert the selector block.
• Introduce the shift rod.
2. Coat the bolt with universal sealer
(Hylomar) and screw in.
3. Install the reverse gear shift lever and
spring and fit the snap-ring.
2. CAUTION: The shift gate is set in
production. If it is undone, a service
shift gate must be installed in its
place.
Install the auxiliary shift rod.
1. Insert the auxiliary shift rod together with
the relay levers.
2. Insert the bolts.
308-03-74
07/2001