Ford 2002 Bantam Workshop Manual page 636

303-01D-132
ASSEMBLY (CONTINUED)
E6005 EN
Engine — 1.8L Diesel - Endura DE
36. Line up the crankshaft and camshaft.
37. NOTE: The cylinder head gasket is marked
38. NOTE: Do not oil the cylinder head bolts.
• Turn the crankshaft until the piston of
cylinder no. 1 is at TDC.
• Turn the camshaft until the slot in the
eccentric on the camshaft is parallel with
the upper edge of the cylinder head (with
the larger semi-circle at the top).
• The crankshaft and camshaft must not
be turned any more.
"TOP / OBEN".
Fit a new cylinder head gasket.
1. Check that the locating sleeves are
seated correctly.
2. Thickness marking as measured in step
Fit the cylinder head and tighten the new
cylinder head bolts in two stages.
303-01D-132
09/2001 2002 Bantam