Ford 2002 Bantam Workshop Manual page 587

303-01D-83
REMOVAL
Engine (21 132 0)
Special Tool(s)
Remover, driveshaft
16-087
21-068 A Engine lifting
bracket
21-068 A Engine lifting
bracket
E5886 EN
Engine — 1.8L Diesel - Endura DE
Removal
1. General note.
2. When removing coolant and ventilation
3.
4. Disconnect the battery ground cable.
5. NOTE: When slackening the nuts, hold with
Special Tool(s)
Remover/installer, radiator
hose clamps
24-003
General Equipment
Puller
hoses, if necessary. For additional
information, refer to Section 303-03.
WARNING: Risk of scalding if the
engine is hot.
Preparatory operations
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
• Open the coolant recovery tank.
an Allen key to prevent from turning.
Slacken the nuts on the two suspension
struts five turns each.
303-01D-83
09/2001 2002 Bantam