Ford 2002 Bantam Workshop Manual page 612

303-01D-108
DISASSEMBLY (CONTINUED)
E6007 EN
Engine — 1.8L Diesel - Endura DE
42. Remove the CKP sensor bracket.
43.
44. Remove the front plate.
45. Remove the oil intake pipe with the bracket.
46.
NOTE: Put the big-end bearing caps and big-
end bearing shells down in order.
CAUTION: Remove the sump
downwards so that no oil sludge or
abraded particles get into the engine.
Remove the sump.
• Press out the crankshaft front oil seal.
CAUTION: Do not damage the piston
ring zone.
Remove the pistons.
• Detach the big-end bearing caps.
• Remove the ring of carbon around the
upper edge of the cylinders using a
proprietary scraper.
• Press out the pistons with the connecting
rods and big-end bearing shells.
303-01D-108
09/2001 2002 Bantam