303-14-248
REMOVAL AND INSTALLATION (CONTINUED)
Electronic Engine Controls
. Install the engine undershield.
5
. Lower the vehicle.
6
. Connect the PCM and CMP electrical
7
connectors.
. Install the hoses and connect the electrical
8
connector.
1. EVAP solenoid valve vacuum hose.
2. PCV hose.
3. Crankcase breather hose.
4. ECT sensor electrical connector.
5. Brake booster vacuum hose.
. Install the accelerator cable.
9
1. Connect the inner cable.
2. Install the cable into the retaining
bracket, check the cable setting and
secure using the clip.
303-14-248