Pinpoint Test F: Incorrect Tyre Wear; F1: Inspect The Tyres; F2: Check For Cupped Tyres; Pinpoint Test G: Vibration - Ford 2002 Bantam Workshop Manual

204-00-14
DIAGNOSIS AND TESTING (CONTINUED)

PINPOINT TEST F: INCORRECT TYRE WEAR

CONDITIONS

F1: INSPECT THE TYRES

F2: CHECK FOR CUPPED TYRES

PINPOINT TEST G: VIBRATION

CONDITIONS

G1: INSPECT THE TYRES

E1049 EN
Suspension — General Information
1 Raise and support the vehicle.
- Inspect the tyres for uneven wear on inner or
• Is there uneven tyre wear?
1 Inspect the tyres for cupping or dishing.
• Are the tyres cupped or dished?
1 Raise and support the vehicle.
- Inspect the tyres for damage or excessive
• Are the tyres damaged or worn?
DETAILS/RESULTS/ACTIONS
REFER to Section 100-02.
outer shoulder, or saw tooth pattern.
Yes
INSTALL new tyres if badly worn. CHECK
wheel alignment. TEST the system for
normal operation.
No
GO TO F2
Yes
INSTALL new tyre(s). BALANCE and
ROTATE the tyres.
REFER to Section 204-03.
TEST the system for normal operation.
No
Verify the customer concern.
DETAILS/RESULTS/ACTIONS
REFER to Section 100-02.
wear.
Yes
INSTALL new tyres. TEST the system for
normal operation.
No
GO TO G2
204-00-14
06/2001 2002 Bantam