Ford 2002 Bantam Workshop Manual page 53

100-04-49
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
F3: CHECK THE FRONT SUSPENSION
F4: REFINISH THE BRAKE DISCS
F5: CHECK THE REAR SUSPENSION
F6: REFINISH THE REAR BRAKES
E859 EN
Noise, Vibration and Harshness
1 Check the front suspension.
- Check the front suspension units, wheel
- Compare component condition vehicle-side-
• Are all the suspension components in good
condition?
Yes
No
1 Refinish the brake discs.
- Refinish brake discs and linings and road test
• Is a shudder or vibration present?
Yes
No
1 Check the rear suspension.
- Check the rear suspension units, wheel
- Compare component condition vehicle-side-
• Are all the suspension components in good
condition?
Yes
No
1 Refinish the rear brakes.
- Refinish the brake drums and install new rear
• Is a shudder or vibration present?
Yes
No
DETAILS/RESULTS/ACTIONS
bearings, front suspension lower arm bushing
and other front suspension components.
to-vehicle-side and to a known good vehicle.
REFER to Section 204-00.
GO TO F4
REFER to Section 204-00.
the vehicle. REFER to Section 206-03.
GO TO F7
Condition corrected.
bearings and other rear suspension
components.
REFER to Section 204-02A / 204-02B.
to-vehicle-side and to a known good vehicle.
GO TO F6
REFER to Section 204-00.
brake shoes. Road test the vehicle.
GO TO F8
Condition corrected.
100-04-49
02/2001 2002 Bantam