Pinpoint Test D: Rough Ride; D1: Check The Suspension Units; Pinpoint Test E: Excessive Noise; E1: Inspect The Suspension - Ford 2002 Bantam Workshop Manual

204-00-12
DIAGNOSIS AND TESTING (CONTINUED)

PINPOINT TEST D: ROUGH RIDE

CONDITIONS

D1: CHECK THE SUSPENSION UNITS

PINPOINT TEST E: EXCESSIVE NOISE

CONDITIONS

E1: INSPECT THE SUSPENSION

E2: INSPECT THE SPRINGS

E1049 EN
Suspension — General Information
1 Make sure the tyres are at the correct
- Raise and support the vehicle.
- Inspect the suspension units for oil leaks or
• Are the suspension units leaking or damaged?
1 Raise and support the vehicle.
- Inspect the suspension unit mounting bolts.
• Are the mounting bolts loose or broken?
1 Inspect the springs for damage.
• Are the springs damaged?
DETAILS/RESULTS/ACTIONS
pressure.
REFER to Section 100-02.
damage.
Yes
INSTALL new suspension units as
necessary. REFER to Section 204-01.
TEST the system for normal
No
Verify the customer concern.
DETAILS/RESULTS/ACTIONS
REFER to Section 100-02.
Yes
TIGHTEN or INSTALL new suspension unit
mounting bolts. REFER to Section 204-01.
(front) REFER to Section 204-02. (rear).
TEST the system for normal operation.
No
GO TO E2
Yes
INSTALL new springs.
REFER to Section 204-01. (front)
REFER to Section 204-02. (rear).
TEST the system for normal operation.
No
GO TO E3
204-00-12
operation.
06/2001 2002 Bantam