Load Active Valve (Lav) - Ford 2002 Bantam Workshop Manual

206-00-21
GENERAL PROCEDURES

Load Active Valve (LAV)

E4252 EN
Brake System — General Information
Removal
WARNING: Brake fluid contains polygly-
col ethers and polyglycols. Avoid con-
tact with the eyes. Wash hands thor-
oughly after handling. If brake fluid con-
tacts the eyes, flush the eyes for 15
minutes with cold running water. Get
medical attention if irritation persists. If
taken internally, drink water and induce
vomiting. Get medical attention immedi-
ately. Failure to follow these instruc-
tions may result in personal injury.
CAUTION: Make sure that the vehicle is
standing on a level surface.
CAUTION: If brake fluid is spilt on the
paintwork, the affected areas must be
immediately washed down with cold wa-
ter.
1. Disconnect the brake pipes from the valve
and drain the brake fluid.
2. Remove the two bolts securing the valve to
the body-mounting bracket.
3. Lower the valve and remove by sliding the
spacer tube assembly off the link rod in the
axle bracket.
4. Remove the link rod from the axle tube
bracket
206-00-21
07/2001 2002 Bantam