Loading Tabbed Paper; Loading Tabbed Paper In Main Body Trays (Trays 1 And 2) - Konica Minolta bizhub PRESS 1250 User Manual

5.5

Loading Tabbed Paper

5.5 Loading Tabbed Paper
Tabbed paper is available for copying when loaded in the following trays:
-
Main body trays (Trays 1 and 2)
-
Paper Feeder Unit PF-703/PF-706 (Trays 3 to 8)
d
Reference
When loading a tray with tabbed paper, be sure to make the size setting of the tray in [Tray Setting] from the
Machine Screen or in [Paper Presetting] from the Copy Screen in order to specify a tab paper size to be used.
See page 6-39 for details.
The machine can be set to automatically discharge the oddments of a set of tabbed sheets loaded in a tray.
See page 5-29 for details.
5.5.1

Loading Tabbed Paper in Main Body Trays (Trays 1 and 2)

Example: 3 sheets of tabbed paper loaded in position for one finished set
Loading orientation
Rear
Example: 9 sheets of tabbed paper loaded in position for 3 finished sets
Loading orientation
Rear
1
Withdraw the main body tray.
% Withdraw the tray specified for a tab paper size.
2
Open the feed roller.
3
Load tabbed paper into the tray.
% Place tabbed paper on the tray referring to the illustration shown above.
NOTICE
Do not load above the limit level indicated on the side guide of the tray.
Carefully load paper to be seated under the paper control lever at the air nozzle.
4
Move the side guides to the edge of tabbed paper.
% Align the tabbed paper to the feed roller side of the tray.
bizhub PRESS 1250/1052
Stacking order
1st TAB
2nd
TAB
Front
3rd TAB
Stacking order
1st TAB
2nd
TAB
Front
3rd TAB
Finished set
Printed/
Copied side
ONE FINISHED SET
Finished set
1st TAB
Printed/
Copied
side
5
1st TAB
2nd TAB
3rd TAB
2nd TAB
3rd TAB
3 FINISHED SETS
5-27