Positioning Highly Transparent Originals - Konica Minolta Di1610 User Manual

3

Positioning Highly Transparent Originals

When making a copy from OHP transparencies, translucent paper, or
other highly transparent original, position the original as detailed below.
1
Raise the Auto Document Feeder or Original Cover.
2
Place the original face down on the
Original Glass.
3
Position the original on the Original
Glass so that the corner of the
original aligns with the arrow in the
upper-left corner of the Original
Scales.
4
Place a blank sheet of paper of the
same size over the original.
5
Gently lower the Auto Document
Feeder or Original Cover.
6
Specify the desired copy settings.
H "Making Copies" on page 4-1
7
Press the [Start] key to start the copy cycle.
3-26
Before Making Copies
Di1610/Di1610p