Table of Contents
Advertisement
3 Copy
Changing the Number of Copies
You can change the number of copies that is set initially during scanning or copying the
document.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
2
Select [Change Quantity...].
3
3
Set the number of copies with the numeric keypad. The new quantity must include the
number of copies that have already been printed. When reducing the quantity, you
cannot enter a number less than the number of copies that have already been printed.
4
Press the <Start> button.
Interrupting the Copy Job
You can temporarily suspend the current continuous copy job to give another job higher
priority.
1
Press the <Interrupt> button.
Note
2
Load the interrupt document and
set features if necessary.
3
Set the number of copies with the numeric keypad.
4
Press the <Start> button.
5
After you have finished making the interrupt copy, press the <Interrupt> button.
Note
6
Press the <Start> button. The suspended copy job is resumed.
54
• The interrupt indicator lights
up to indicate that the
machine is in the job interrupt
mode.
• The interrupt indicator goes out to indicate that the interrupt is canceled.
• Remove the interrupt document from the document glass when using the document glass.
1
2
3
4
5
6
7
8
9
#
0
C
1
2
3
4
5
6
7
8
9
#
0
C
<Stop> button
<Interrupt> button
Advertisement
Table of Contents
