Table of Contents
Advertisement
11 System Settings
iFax Control
You can make the settings relating to control of Internet fax (iFax) operation.
1
Select [iFax Control].
2
Select the item to be set or
changed, and select [Change
Settings].
Note
3
Select the setting value.
11
4
Select [Save].
iBroadcast iFax Profile
Set the default value for iFax profile when carrying out an iFax broadcast send.
A profile is specified to restrict attribute information such as image resolution and paper
size for transmissions between iFax compatible machines.
Important • The TIFF file profiles that can be handled depend on the other party's iFax supporting machine.
TIFF-S
This profile is the iFax standard. For documents that are larger than A4, the size is
reduced automatically to A4 for transmission.
TIFF-F
Select this profile when you specify super-fine for the resolution or when you send A3
or B4 documents.
TIFF-J
Select this profile for sending documents in JBIG.
Broadcast Communication Mode
Set the default value for communications mode when sending an iFax broadcast.
Delivery Confirmation Method
Set the default value for the method of confirming that a transmitted iFax has arrived at
its destination.
Note
Delivery Receipts (DSN)
You can confirm whether the iFax you sent was delivered to the recipient's mailbox
successfully.
Read Receipts (MDN)
You can confirm whether the iFax including attachments you sent was processed
properly at the recipient.
322
• Select [
] to display the
previous screen and select
[
] to display the next screen.
When specifying a profile, check that it can be handled by the other party's iFax supporting
machine.
• You can use [Delivery Receipts (DSN)] when the other end supports the DSN feature. You
can use [Read Receipts (MDN)] when the other end supports the MDN feature.
Advertisement
Table of Contents
