Table of Contents
Advertisement
1
Select [Mixed Size Originals].
2
Select [On].
Off
Select this item when all documents are of the same size.
On
When scanning documents of different sizes, the machine automatically detects the
size of each document.
Edge Erase (Erasing Edges and Margin Shadows in the Document)
When you scan a document while the document cover is open or when you scan a
booklet, black shadows sometimes appear along the edges or center margin of the
output scanned image. This feature allows you to erase such shadows.
Note
1
Select [Edge Erase].
2
Select [Edge Erase].
3
Use [ ] and [ ] to set the erase
widths of top and bottom, left and
right, and center of the document.
4
Select [Original Orientation].
Normal
The edge erase amount is set to 2 mm for the top and bottom, and left and right. If you
do not want to erase edges, set each [Edge Erase] value to 0 mm.
Edge Erase
You can erase only the amount necessary.
Top & Bottom Erase
Shadows at the top and bottom of the document are erased. Edges at the top and
bottom are erased in accordance with the direction that the document was loaded.
You can set the edge erase width within the range from 0 to 50 mm in 1 mm
increments.
Left & Right Erase
Shadows on the left and right of the document are erased. Edges on the left and right
are erased in accordance with the direction that the document was loaded. You can
set the edge erase width within the range from 0 to 50 mm in 1 mm increments.
Binding Erase
Shadows in the center of documents such as booklets or documents with facing
pages are erased. You can set the binding erase width within the range from 0 to 50
mm in 1mm increments.
• For 2-sided originals, the same edge erase amounts are set for the front and back sides.
• If you set [Reduce/Enlarge], the edge erase amounts will be reduced or enlarged in
proportion to the ratio you configured.
Scan Options
5
185
Advertisement
Table of Contents
