Paper Jams In The Tray 6 (High Capacity) - Fuji Xerox ApeosPort 450 I User Manual

Table of Contents

Advertisement

Paper Jams in the Tray 6 (High Capacity)

This section describes how to clear paper jams in the Tray 6 (bypass).
The following explains how to remove jammed paper from the locations below.
Paper Jams at the Exit of the Tray 6 (High Capacity).............................................................. 511
Paper Jams under the Top Cover of the Tray 6 (High Capacity)............................................. 511

Paper Jams in the Tray 6 (High Capacity) ............................................................................... 512

Paper Jams at the Exit of the Tray 6 (High Capacity)
1
Grip the handle on the upper left
side of the Tray 6 (high capacity) to
move the Tray 6 in the direction of
the arrow.
2
Remove the jammed paper.
Note
3
Gently put the Tray 6 (high capacity) back into position.
Paper Jams under the Top Cover of the Tray 6 (High Capacity)
1
Grip the handle on the upper left
side of the Tray 6 (high capacity) to
move the Tray 6 in the direction of
the arrow.
2
Open the tray 6 top cover.
• If paper is torn, check for any
torn pieces of paper inside the
machine.
Paper Jams
16
511

Advertisement

Table of Contents
loading

Table of Contents