Reply To (Setting Address for Reply)
When using the [E-mail] feature, you can specify the address for reply.
1
Select [Reply To].
2
Enter an address for reply.
Clear Field
Deletes the address entered in [Reply To].
Enter Sender's Address
The address set for [From] is set as a reply address.
Note
Address Book
Select the sender's E-mail address from the Address Book.
For more information, refer to "Address Book" (P.167).
File Name Conflict
(Setting Procedures When a File Name is Overlapped)
When using the [Scan to FTP/SMB] feature, you can set the action to be taken when
the file name is overlapped with another file stored in the destination.
1
Select [File Name Conflict].
2
Select any item.
Cancel Job
The job is canceled and the file is not saved.
Change Name and Save
The file name is automatically changed and saved. The machine adds a number (0001
- 9999) to the end of the file name.
Overwrite Name and Save
The existing file is replaced with the new one.
• This button is enabled only when an address is set for [From] on the [E-mail] screen.
Output Format
5
189