Table of Contents
Advertisement
11 System Settings
Port Settings
Set the interface by which the machine is connected to a client. In [Port Settings], you
can set the following items.
For information on port settings, refer to the Network Administrator Guide.
11
Protocol Settings
Set the parameters required for communications. In [Protocol Settings], you can set the
following items.
For information on protocol settings, refer to the Network Administrators Guide.
Machine E-mail Address/Host Name
Set the e-mail address and host name for the machine. In [Machine E-mail Address/
Host Name], you can set the following items.
For information on e-mail address/host name of the machine, refer to the Network Administrator Guide.
POP3 Server Settings
Set the POP3 server. In [POP3 Server Settings], you can set the following items.
For information on POP server settings, refer to the Network Administrator Guide.
296
1. Parallel
2. USB
3. LPD
4. NetWare
5. SMB
6. IPP
1. Ethernet Settings
2. TCP/IP - Get IP Address
3. TCP/IP - IP Address
1. E-mail Address
2. Host Name
3. Domain Name
1. POP3 Server Setup
2. POP3 Server IP Address
3. POP3 Server Name
4. POP3 Server Port Number
7. Ether Talk
8. Salutation
9. Port 9100
10. SNMP
11. FTP Client
12. Receive E-mail
4. TCP/IP - Subnet Mask
5. TCP/IP - Gateway Address
6. TCP/IP - IP Filter
5. POP3 Server Check Interval
6. POP3 Server Login Name
7. POP3 Server Password
8. POP Password Encryption
13. Send E-mail
14. Mail Notice Service
15. UPnP Discovery
16. Internet Service (HTTP)
17. SOAP
18. WebDAV
Advertisement
Table of Contents
