Table of Contents
Advertisement
9
Return the staple cartridge holder
to its original position by pushing it
in until it clicks into place.
10
Close the front cover of the finisher.
Note
Replacing the Staple Cartridge
(When a C Finisher/C Booklet Finisher is Installed)
When a C Finisher (optional) is installed and it is time to replace the staple cartridge, a
message appears on the touch screen. When this message appears, load a new staple
case into the staple cartridge.
The following shows the procedure for replacing the staple cartridge when a C Booklet
Finisher installed. The procedure is also the same on the machine with a C Finisher
installed.
Important • Use of staples not recommended by Fuji Xerox can impair machine performance. Use only
Note
1
Make sure that the machine is not
in operation, and open the front
cover.
2
Hold the staple cartridge holder by
the lever R1, and pull it to the right
towards you.
• A message will be displayed and the machine will not operate if the front cover of the finisher
is not completely closed.
staple cartridges recommended by Fuji Xerox.
• To order a new staple cartridge, contact our Customer Support Center.
Replacing Consumables
433
15
Advertisement
Table of Contents
